9 Ways to Fix iPhone Stuck in Boot Loop [iOS 17 Supported] (2024)

iOS users frequently report the issue of their iPhones getting stuck in a boot loop in theApple Community. It can be really frustrating when your iPhone keeps restarting and can't load onto your home screen.

So, what causes a boot loop on your iPhone, and how can you fix this issue? This post will explain the reasons and offer solutions for an iPhone stuck in the boot loop. Read on and check it out.

Why Is My iPhone Stuck on the Boot Loop Screen?

iPhone can get stuck in the boot loop for different reasons. The most common causes are listed below:

• iOS Update: Improperly updating to the new iOS may cause the iPhone boot loop problem. If the upgrading is interrupted, the device may also get stuck.
• iPhone Jailbreak: While jailbreaking an iPhone brings many new possibilities, it can also cause serious problems. If not done correctly, your iPhone may get stuck in a boot loop.
• Unstable Connection: If you update, backup, or restore your iPhone using iTunes/Finder, the unstable connection between the iPhone and the computer will also cause your iPhone to get stuck in a boot loop.
• Screen Replacement: A more severe problem will occur if your iPhone screen is replaced improperly. Remember not to simply replace the broken screen before taking other measures.
• Battery Connector Malfunction: If your iPhone has been used for a long time and the battery connector is damaged, it will not get enough power, leading to the boot loop issue.

How Do I Get My iPhone Out of Boot Loop? (No Data Loss)

Way 1. Force Restart the iPhone

The simplest method to fix the iPhone boot loop is to force restart the device. To do that, follow these steps:

• For iPhone 8 or later models: Press the Volume Up button and release it quickly. Then press the Volume Down button and release it quickly. Finally, press and hold the Power button until the Apple logo appears.
• For iPhone 7 and 7 Plus: Press the Volume Down and Power buttons together until the Apple logo shows up on the screen.
• For iPhone 6s and earlier models: Press the Power and Home buttons at the same time until you see the Apple logo on the screen.

Way 2. Update Your iPhone

iOS updates often bring bug fixes that can help to solve the software glitches that are causing the iPhone boot loop. To fix this, you can try updating your iPhone to the latest version of iOS 17.

To do that, navigate to Settings > General > Software Update to check if a new iOS update is available. If yes, tap Download and Install to update your iPhone.

Way 3. Update Your iTunes/Finder

If your iPhone gets stuck in a boot loop while attempting an update or restore via iTunes or Finder, it is because you are using an old version of iTunes or MacOS. In this case, you can check your iTunes or MacOS and update it to the latest version.

• Update MacOS and Finder: Click on the Apple logo, choose About This Mac, and tap on Software Update. If an update is available for your Mac, click on Upgrade Now.

• Update iTunes: Open iTunes and select Help from the menu. Click on Check for Updates, and follow the on-screen instructions to install the newest version.

Way 4. Reset All Settings on Your iPhone

Incorrect settings may also cause this boot loop on your iPhone. To remove the wrong settings that cause this issue, you can reset your iPhone's settings to factory defaults .

Here's how to do it: head to Settings > General > Transfer or Reset iPhone > Reset and tap Reset All Settings. Then, enter your passcode to confirm. This process won't delete data on your iPhone, but you will need to re-enter your WiFi password.

Way 5. Using Third-party Repair Tool

iPhone boot loop issue is often caused by software errors and you can rely on a third-party iOS repair tool to fix it. FoneGeek iOS System Recovery is a professional tool that will help you fix iPhone issues without losing any data. It is well known for repairing various iOS system issues, like boot loop, iPhone black screen, iPhone stuck on Apple logo, Recovery mode, etc.

Follow the step-by-step guide to fix the iPhone boot loop issue with FoneGeek iOS System Recovery;

Step 1. Download and install FoneGeek iOS System Recovery on your computer. Then, launch the program and choose Standard Mode to continue.

Step 2. Connect your iPhone to the computer with a USB cable and click on Next. Wait for the program to recognize the connected device.

If your iPhone is not recognized, follow the on-screen instructions to put it into Recovery mode or DFU mode.

Step 3. Once your iPhone is detected, confirm the device information and choose the firmware that matches the device. Then click Download.

Step 4. When the download is complete, click on Fix Now to begin the repair process. Ensure that your iPhone is connected during the whole process.

More Features of FoneGeek iOS System Recovery

• Provides two different modes to ensure a higher success rate. The Standard Mode can get your iPhone back to normal without Data Loss.
• Fix common iTunes errors and help to downgrade iOS 17 to any supported versions without jailbreak.
• Support all iOS versions and iPhone models, including the latest iOS 17/16 and iPhone 15/14.
• Recommended by Mobile Mall, GetDroidTips, Inspirationfeed, Techjury, Pakainfo, and won positive feedback from global customers.

Complex Methods to Fix iPhone Stuck in Boot Loop (Data Loss)

Way 6. Restore iPhone Using iTunes/Finder

You can restore your iPhone using iTunes/Finder and reload the software to eliminate any issues. It's necessary to note that the existing data will be erased after the restoration. You'd better make a backup of the device data before you start. Now follow the steps listed below:

1. Connect your iPhone to the computer using a USB cable, then launch iTunes/Finder if it is not opened automatically.
2. You'll soon receive the message that your iPhone has a problem and needs to be restored or updated. Just tap on Restore to proceed.
3. If you don't get such a message, click Summery, and you'll view the option to Restore. Now click on this option to manually restore your iPhone system.

When the restore process is complete, you can either set up your iPhone as new or restore it from a recent backup.

Way 7. Put iPhone Into Recovery Mode

You can also fix THE iPhone boot loop issue by putting the device into recovery mode and then restoring it using iTunes. However, this method will also erase all data and settings from your iPhone.

1. Connect your iPhone to your computer and launch iTunes.
2. Follow the steps in Way 1 to hard reset your iPhone and put it into recovery mode.
3. Once your iPhone is in recovery mode, iTunes will offer you the option to Restore or Update. Click on Restore.

Way 8. Clean App Data on iPhone

Occasionally, unsecured apps can cause an iPhone to get stuck in a boot loop. You should not download apps from unknown companies or sources outside the Apple Store, as they may affect your iPhone's performance.

To check if problematic apps are causing your iPhone to get stuck in a boot loop, navigate to Settings > Privacy > Analytics > Analytics Data menu. If any apps are listed repeatedly, uninstall them and clear their data to see if the iPhone boot loop issue is resolved.

Way 9. Check for Hardware Problems

If none of the above methods worked to fix the iPhone boot loop problem, the device must have a serious hardware problem. It is necessary to check whether any fault occurs in the battery connector or on the iPhone.

If it is truly the problem with the battery connector, it would be better to get help at a local Apple Store in case to make it worse.

Conclusion

You can certainly bring your iPhone back to normal after trying the 9 solutions given in this article. If you don't know which method to choose, check the review of these solutions below: